Skip to content
BAKARTEC — back to top

BAKARTEC — automation and process control engineering

Slide 1 of 4

Clean room lit by a ceiling grid of light panels, with two engineers in clean-room suits

Lighting control

DALI lighting, engineered end to end

Addressing, grouping, PLC logic and operator screens. Every fixture controlled and monitored centrally.

21.6 °CAHUCHWTT01TT02FT03TT0412.8 °C

Building systems

BMS and HVAC — panel to screen

PLC and SCADA for HVAC, utilities and fan-coil units, with every I/O point verified on site.

XZXZY

Process and machines

Drives, sensors and safety — commissioned

Multi-axis drives, laser sensing and failsafe logic — reviewed before site, proven at FAT.

OTITPLCPLCPLCPLCOPC UA

OT / IT data

Plant data, delivered safely to IT

Live PLC data over encrypted OPC UA — one-way to IT where security demands it.

About

Who we are

BAKARTEC is an automation and process-control contractor led by two partners: a controls engineer who designs, programs and commissions the system, and an automation operations lead who makes sure it is delivered on schedule and keeps running.

Anton Konovalov, co-founder of BAKARTEC

Anton Konovalov

Co-founder · Automation & Control Engineer

Siemens PLC and SCADA engineering, safety-system commissioning and OPC UA software in C#/.NET — from the electrical panel to client handover.

Anton has worked in industrial automation since 2019, covering the full path of a control system: electrical-panel and field troubleshooting, Siemens PLC programming in Ladder and SCL, SCADA/HMI development, OPC UA communication, site acceptance tests, commissioning and handover.

His projects span facility BMS for the semiconductor industry — HVAC, utilities, DALI lighting and fan-coil units; Fire & Gas cause-and-effect and emergency-shutdown logic in SIMATIC PCS 7 on an offshore gas-production facility; and failsafe crane automation with multi-axis drives and laser positioning systems at a seaport.

Alongside PLC and SCADA work he designs and builds industrial software in C#/.NET: OPC UA collectors that run as Windows services, WPF operator tools, and one-way OT-to-IT data transfer through a unidirectional gateway for critical infrastructure.

Focus

  • Siemens S7-1500 · TIA Portal
  • SIMATIC PCS 7
  • SCADA / HMI
  • OPC UA
  • C# / .NET
  • FAT · SAT · commissioning

Contact

Igor Lebedinskiy, co-founder of BAKARTEC

Igor Lebedinskiy

Co-founder · Automation Operations Lead

Leads automation operations: robotic material-handling systems, 24/7 support of mission-critical equipment, teams, suppliers and quality.

Igor has spent more than a decade in automated semiconductor manufacturing. He started as an automation equipment technician on automated material-handling systems — overhead hoist transport, AGVs, stockers and load ports — and for the past eight years has led the production and automation team of a cleanroom fab.

He has recruited, trained and led multidisciplinary teams of technicians, run 24/7 support for mission-critical robotic systems, and introduced Lean and data-driven control processes that cut quality incidents by 80% and delivered significant savings through team performance and spare-parts inventory management.

His background also covers IT systems and network administration for high-performance computing environments, and leading a quality-assurance team on defence-industry production lines. He holds a B.A. in Economics and Management and a practical-engineering diploma in electronics and computers.

Focus

  • AMHS · robotics
  • 24/7 operations
  • Team and supplier management
  • Lean · operational excellence
  • Quality assurance
  • IT infrastructure

Contact

Services

What we design, program and commission

Lighting control

DALI lighting control

DALI turns every luminaire into an addressable device. We integrate it directly into the building's PLC and SCADA, so lighting is controlled, grouped and diagnosed like any other part of the plant — not as a separate island.

Experience base

Multi-bus DALI lighting integrated into the building-management system of a semiconductor facility.

What we do

  1. Design and hardware

    DALI buses on PLC-integrated modules or gateways, with bus power, topology and wall-switch devices specified up front.

  2. Addressing and grouping

    Every driver is scanned, identified and addressed to match the floor plan. Rooms and zones are groups in software, so re-zoning needs no rewiring.

  3. PLC logic and HMI

    Switching, dimming and status polling in the PLC. Operator screens with a faceplate per fixture: on and off, level setpoint, actual level, and gear or lamp failure.

  4. Local control

    DALI-2 wall switches and sensors on the same bus — the room keeps working on its own, and the control room sees everything.

  5. Commissioning and fault-finding

    Bottom-up testing from the bus to the screen, as-built documentation and a backup of every device setting. We find the shorted branch, the duplicate address and the swapped wall plate.

Technologies

  • DALI / DALI-2
  • Siemens CM 1xDALI
  • ET 200SP
  • TIA Portal
  • Lunatone DALI Cockpit
  • GE CIMPLICITY

Building systems

BMS and HVAC control

A building-management system is only as good as its last verified signal. We program the controllers, build the operator screens and test every point — from the field device to the display.

Experience base

Facility monitoring and control (FMCS) for a semiconductor site — HVAC, process utilities, fan-coil units and lighting.

What we do

  1. PLC engineering

    Siemens S7-1500 and ET 200SP logic in Ladder and SCL: function blocks, analog scaling, alarm limits (HH/H/L/LL), and detection of open loops and out-of-range signals.

  2. SCADA and HMI

    Operator screens with reusable object classes, pop-up faceplates, trends, alarms and data logging — built to the client's standards.

  3. HVAC and utilities

    Chilled- and hot-water headers, room temperatures, process utilities such as gases, vacuum and cooling water, breaker status and power metering.

  4. Communications

    OPC UA between PLC and SCADA; Modbus TCP and RTU for fan-coil units, meters and third-party devices, including gateways and addressing.

  5. I/O verification and SAT

    Every channel is traced from the electrical drawing through the PLC to the screen. Analog loops are tested end to end, and field issues are resolved on site.

Technologies

  • SIMATIC S7-1500
  • ET 200SP
  • TIA Portal · LAD / SCL
  • GE CIMPLICITY
  • OPC UA
  • Modbus TCP / RTU

Process and machines

Process and machine automation

Moving machinery leaves no room for assumptions. We review the program against the drawings and the drive data before anyone goes to site, then commission the axes, the sensors and the safety functions against the specification.

Experience base

Failsafe automation of container-handling cranes at a seaport — S7-1500F, SINAMICS S120 multi-axis drives, and laser systems for collision prevention and positioning.

What we do

  1. Drives and motion

    Multi-axis drive systems — infeed and motor modules, VFDs, encoders, ramps and limits — checked axis by axis and compared across axes that should behave identically.

  2. Failsafe PLC

    F-CPU programs, PROFIsafe devices and drive safety functions verified against the safety specification: signatures, F-I/O and every bypass accounted for.

  3. Laser and 3D sensing

    Laser scanners and positioning sensors for collision prevention and for load and vehicle positioning — integrated over PROFINET, PN/PN couplers and distributed I/O.

  4. FAT and commissioning

    Specifications become checkable test steps. Factory and site acceptance run with a written record of what was observed — not of what was expected.

  5. Root-cause diagnosis

    An AI-assisted engineering workspace cross-references the PLC program, the circuit diagrams and the vendor documentation, so a fault is traced from the alarm to the terminal — and every answer cites its source.

Technologies

  • SIMATIC S7-1500F
  • PROFIsafe
  • SINAMICS S120
  • PROFINET
  • PN/PN coupler
  • TIA Portal · Safety / Startdrive

OT / IT data

OT/IT data systems

Plant data is most useful outside the plant network — and most dangerous to fetch. We build custom software that collects it from the controllers over secure industrial protocols and delivers it to the IT side, shaped for the people who need it.

Experience base

An OPC UA telemetry service that delivers plant data one-way from OT to IT through a unidirectional gateway for a critical-infrastructure operator, validated by a large automated test suite.

What we do

  1. Secure collection

    OPC UA clients with signed and encrypted sessions, certificate-based trust and automatic recovery — reading the PLCs directly or through an OPC server, whatever fieldbus sits underneath: PROFINET, Modbus or S7.

  2. One-way transfer

    For critical infrastructure, data crosses a unidirectional gateway (a data diode): it flows out to IT, and nothing can flow back into the plant network.

  3. Live view and control

    Dashboards with live transmitter and sensor readings, trends and alarms. Control from the IT side only where the architecture allows a secured return path.

  4. Analysis and predictive maintenance

    Historical data, performance indicators and condition monitoring that flag drift before it becomes downtime.

  5. Alerts and automation

    Rule-based e-mail and messaging — filtered, formatted and routed, so the right alarm reaches the right person.

  6. Built to run unattended

    Windows services with health reporting, validated configuration, auditable logs, verified archives and an automated test suite behind every release.

Technologies

  • OPC UA
  • C# / .NET
  • WPF / MVVM
  • Windows Services
  • KEPServerEX
  • Unidirectional gateway
  • SMTP

Contact

Tell us about your system

A new line, a retrofit, a fault nobody can find, or data stuck on the plant floor — write or call, and you will talk directly to the engineer.

Based in Israel

Anton Konovalov

Co-founder · Automation & Control Engineer

Igor Lebedinskiy

Co-founder · Automation Operations Lead